Shopping Cart

Free USA shipping on all orders

SDS Sheet

NAB cooling NB MA- X PRO 3.5g Material Safety Datasheet

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) Revision Date: 21. Nov. 2018

Section 1: Identification of the substance/mixture and of the company

  1. Product Identifier

Commercial Name: N-B MAX PRO 3.5g Part No./EAN: N-B-3-5-G / 850027182001

  1. Relevant Identified uses of the substance or mixture and uses advised against Use of the Substance of Mixture: Electrical industry and electronics

Uses advised against: None known

  1. Details of the Supplier of the Safety Data Sheet Company:

Rockland toys for less corp 372 Ten eyck street, Brooklyn N.Y. 11206

Phone: 1-845-535-1405

www.nabcooling.com

Email Address: info@nabcooling.com

  1. Emergency Telephone Number English: 1-845-535-1405

Section 2: Hazards Identification

  • GHS Classification¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† Not a Hazardous Substance.
  • GHS Label Element¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† Not a Hazardous Element
  • Other Hazards¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† None known

Section 3: Composition/Information on Ingredients

  • Substance/Mixture:¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† Mixture
  • Chemical Nature¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬†¬† Silicone Compound

Section 4: First Aid Measures

4.1 Description of First Aid Measures

If Inhaled                                                       
If inhaled, remove to fresh air. Get medical attention if symptoms occur.

In case of skin contact                                    
Wash with water and soap as a precaution. Get medical attention if symptoms occurs.

In case of eye contact                                     
Flush eyes with water as a precaution. Get medical attention if irritation develops and persist.

If swallowed                                                   
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.

4.2 Most important symptoms and effects, both acute and delayed None known.

4.3 Protection of first-aiders                        

No special precautions are necessary for first aid responders

  • Notes to physician                                 Treat symptomatically and supportively

Section 5: Fire Fighting Measures

5.1 Suitable extinguishing media                 
Water Spray
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical

Unsuitable Extinguishing Media                        None known

5.2 Specific Hazards during firefighting Exposure to combustion products may be a hazard to health

5.3 Hazardous combustion products           
Carbon oxides
Silicon oxides
Formaldehyde
Metal oxides

5.4 Specific Extinguishing methods             
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopen containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

5.5 Special Protective Equipment                
Wear self-contained breathing apparatus for firefighting if necessary. Use Personal protective equipment.

Section 6: Accidental Release Measures

6.1 Personal precautions, protective equipment, and emergency procedures
Follow safe handling advice and personal protective equipment recommendations

6.2 Environmental precautions                    
Discharge into the environment must be Avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.

6.3 Methods and material for containment and cleaning up: 
Soak up with inert absorbent material. For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in an appropriate container. Clean up remaining material from spill with suitable absorbent. Local and national regulations may apply to releases and disposals of this material, as well as those materials and items employed in the clean-up of releases.

You will need to determine which regulations are applicable.

Section 7: Handling and Storage

7.1 Technical Measures: See Engineering under Exposure Controls / Personal Protection Section.

7.2 Local/Total ventilation: Use only with adequate Ventilation

7.3: Advice on safe handling: Handle in accordance with good industrial hygiene and safety practice. Take care to prevent spills, waste and minimize release to the environment.

7.4 Conditions for safe storage: Keep in properly labeled containers. Store in accordance with the particular national regulations

7.5 Materials to avoid: Do not store with the following  products types: Strong oxidizing agents

Section 8: Exposure Controls / Personal Protection

8.1 Contains no substances with occupational exposure limit values.

Engineering measures: Processing may form hazardous compounds (see section 10). Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations. Dust formation may be relevant in the processing of this product. In addition to substance-specific OELs, general limitation of concentrations of particulates in the air at workplaces have to be considered in workplace risk assessment. Relevant limits include: OSHA PEL for Particulates Not Otherwise Regulated of 15 mg/m3- total dust, 5 mg/m3 ‚Äďrespirable fraction; and ACGIH TWA for Particles (insoluble or poorly soluble) Not Otherwise Specified of 3mg/m3 ‚Äďrespirable particles, 10 mg/m3- inhalable particles.

8.2 Personal protective equipment: Respiratory protection: No personal respiratory protective equipment normally required.

8.3 Hand Protection

Remarks: Wash hands before breaks and at the end of the workday.

Eye protection: Wear the following personal protective equipment: Safety glasses.

Skin and body protection: Skin should be washed after contact.

Hygiene measures: Ensure that eye flushing systems and safety showers are located close to the workplace. When using do not eat, drink or smoke. Wash contaminated clothing before re-use. The precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require added precautions.

Section 9: Physical and Chemical Properties

Appearance:                                                   Grease

Color:                                                             Gray

Odor:                                                              None

Odor Threshold:                                              N/A

pH:                                                                 N/A

Flash point:                                                     <200¬įC Method: closed cup

Evaporation rate:                                             Not applicable

Flammability (solid, gas):                                 Not classified as a flammability hazard

Explosive properties:                                       Not explosive

Section 10: Stability and Reactivity

Reactivity: Not classified as a reactivity hazard

Chemical stability: Stable under normal conditions.

Possibility of hazardous: Can react with strong oxidizing agents. When heated to temperatures about 150¬įC (300¬įF) in the presence of air, product can form formaldehyde vapors. Safe handling conditions may be maintained by keeping vapor concentrations within the occupational exposure limit for formaldehyde. Formaldehyde may cause cancer. It is also toxic by inhalation, skin absorption and ingestion, corrosive to skin and eyes, and may cause skin sensitization and respiratory irritation. See OSHA formaldehyde standard, 29 CFR 1910.1048 Hazardous decomposition products will be formed at elevated temperatures.

Conditions to avoid: None known.

Incompatible materials: Oxidizing agents

Section 11: Toxicological Information

11.1 Information on likely routes of exposure
Skin contact
Ingestion
Eye contact

11.2 Acute toxicity: Not classified based on available information

11.3 Skin corrosion/irritation: Not classified based on available information

11.4: Serious eye damage/eye irritation: Not classified based on available information

11.5 Respiratory or skin sensitization: Not classified based on available information

11.6 Germ cell mutagenicity: Not classified based on available information

11.7 Carcinogenicity: Not classified based on available information

IARC: No Ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

OSHA: No Ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by OSHA.

NTP: No Ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by NTP.

Reproductive toxicity: Not classified based on available information

STOT- single exposure: Not classified based on available information

STOT- repeat exposure: Not classified based on available information

Aspiration toxicity: Not classified based on available information

11.8 Further Information
Product Remarks:                                          
The product contains tetramethoxysilane which is highly toxic by inhalation. The 4 hour LC50 in rats is 63 ppm. Severe eye injury ranging from eye pain to blindness and eye loss has resulted from occupational exposure to tetramethoxysilane. Exposure to air concentrations of 200 to 300 ppm for 15 minutes can induce minimal eye lesions and exposure at 1000 ppm can produce corneal damage.

Section 12: Ecological Information

12.1 Ecotoxicity: No data available

12.2 Persistence and degradability: No data available

12.3 Bioaccumulative potential: No data available

12.4 Mobility in soil: No data available

12.5 Other adverse effects: No data available

Section 13: Disposal Considerations

13.1 Disposal methods: This product has been evaluated for RCRA characteristics and does not meet the criteria of hazardous waste if discarded in its purchased form.

13.2 Resource Conservation and Recovery Act (RCRA)

13.3 Waste from residues: Dispose of in accordance with local regulations

13.4 Contaminated packaging: Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling disposal.

Section 14: Transport Information

14.1 UNRTDG: Not regulated as a dangerous good

14.2 IATA-DGR: Not regulated as a dangerous good

14.3 IMDG- Code: Not regulated as a dangerous good

14.4 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code: Not applicable for product as supplied

14.5 49 CFR: Not regulated as a dangerous good

Section 15: Regulatory Information

15.1 EPCRA- Emergency Planning and Community Right-to-Know

15.2 CERCLA Reportable Quantity: This material does not contain any components with a CERCLA RQ

15.3 SARA 304 Extremely Hazardous Substances Reportable Quantity: This material does not contain any components with a section 304 EHS RQ.

SARA 311/312 Hazards:  No SARA Hazards

SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302

SARA 313: The following components are subject to reporting levels established by SARA Title III, Section 313: Treated Zinc Oxide Proprietary Ingredient 27%

15.4 US State Regulations:

Pennsylvania Right to know
Treated alumina:vProprietary Ingredient 50-70 %
Treaded Zinc Oxide: Proprietary Ingredient 20-30 %
Dimethyl siloxane, dimethylvinylsiloxy and trimethoxysiloxy-terminated: 471277-16-4 5-10%

New Jersey Right to know
Treated alumina: Proprietary Ingredient 50-70 %
Treaded Zinc Oxide: Proprietary Ingredient 20-30 %
Dimethyl siloxane, dimethylvinylsiloxy and trimethoxysiloxy-terminated: 471277-16-4 5-10%

California Prop 65                                          
This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.

Section 16: The Ingredients of this product are reported in the following inventories

IECSC: All ingredients listed or exempt.

REACH: All ingredients (pre) registered or exempt.

TSCA: All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances.

AICS: One or more ingredients are not listed or exempt.

KECI: One or more ingredients are not listed or exempt.

Inventories: AICS (AUSTRALIA), DSL (CANADA), IECSC (CHINA), REACH (EU), ENCS (JAPAN), ISHL (JAPAN), KECI (SOUTH KOREA) NZIoC (NEW ZEALAND) PICCS (PHILIPPINES), TCSI (TAIWAN), TSCA (USA

Section 17: Other Information

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and shall not be considered a warranty or quality specification of any type.

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
ūüĎč Hi, how can I help?